Piezas de carreras Oval de Asfalto

Asphalt Oval Track Racing Parts

Car racing is an exciting sport, especially when your car is in good shape. The right parts can help you to win championships. Supply yourself with the parts you need for victory.

What parts are available for asphalt oval track racing?
  • Tire regroover: If you want to create additional tread depth, use this tool to carve out the rubber in the groove of the tire.
  • Engine: A high-powered engine can help you to get the jump you need off the starting line to avoid the pack.
  • Carbon fiber dash: This is a durable, lightweight synthetic fiber.
  • Racing transmission: A continuous manual transmission is used in high-performance vehicles such as a racing car. It selects the gears in order, but you do not have direct access to a specific speed.
What are essential elements of well-designed oval track racing cars?

Materials that will help improve performance and durability are necessary elements needed to win championships. Here is a list of five of those elements.

  • The front end geometry: The settings and the moment center location set the tone for how the parts and setup will work. You need to locate the moment correctly, and the cambers have to set up the right way.
  • The rear geometry of the car: The parts you use to locate the back end has to be thought out and set correctly. The rear-steer relies on the control arm angles. When the car speeds up, the third link angle readjusts the load. If you have a metric four-link vehicle, the four control arms set the rear moment center height. When you are on the asphalt, the rear-end steer should not be at the right.
  • The steering geometry: Steering is essential in any racing involving turns. You need to make sure you do not have excess bump steer. You also need the correct Ackermann and steering quickness. The Ackermann can be checked by using laser system strings.
  • The alignment of the car: Align the rear end by 90 degrees to the center line of the frame. The right side tire contact patches and the front tire have to line up together. The area between the drive shaft, the two pinion shafts, and the transmission output shaft should be equal in the opposite direction.
  • The setup balance of the vehicle: For you to have a balance between the front and rear suspension, the setup and the inner workings of the vehicle need organizing. The turn angles have to be just right.

Categorías